Click image to enlarge
1/8"-27 NPTF LEVL-SEAL Thread, 7/8" Taper Pressure Plug, Stainless Steel
Unbrako Part No. 183840
|Item||Taper Pressure Plug|
|System of Measurement||Inch|
|Thread Pitch / TPI||27|
|Taper Per Foot||7/8" / LEVL-SEAL|
|Thread Direction||Right Hand|
Unbrako Pressure Plugs are made to closer tolerances, are generally of higher quality, and almost all have taper threads. When properly used, they seal at pressures to 5000 psi, without a sealing compound (pressure tests are usually at 20,000 psi). They are often used in hydraulic and pneumatic designs. The design of LEVL-SEAL plug permits seating within half a pitch in a normally tapped hole. Conventional plugs have a looser tolerance of a full pitch and usually protrude above the surface. Flush seating improves appearance and adds safety.
- Precision hex socket with maximum depth for positive wrenching at higher seating torques
- Used properly they will seal at pressures to 5000 psi, without a sealing compound (pressure tests are usually at 20,000 psi).
- Flush seating is achieved through closer control of thread forms, sizes and taper-improves safety and appearance
- Log In for Price
- Box Qty: 100
Call For Volume Discounts